Saturday 18 June 2016

Do You Want To Know How Can You Sand Your Wooden Floor

To start this job, you have to remove all the nails that are projected on the wooden surface and clean the floor with the help of vacuum cleaner. Room should also be emptied if it is cluttered. However, if certain furniture like sofa or tables cannot be removed due to shortage of space, then it can remain over there and it can be moved as and when needed.

1. What kind of tools is required for this job?

You will basically need following tools in order to sand your wooden flooring. The experts from flooring Morpeth services in your locality will help you here. These tools are easily available from any tool shops in your area. They will also provide you instructions manual to know how to use them.

Drum sander

Edging sander

Hammer

Nail punch

Sand paper

Vacuum cleaner

Also you need following items for your protection

Dust masks

Ear plug

Sensible shoes

2. Is it necessary to punch every nail before starting sanding job?

It may not be absolutely necessary to punch every nail. However, you must check that no nails are protruding out of the wooden surface. This may obstruct your sander and also can damage your machine.

3. How to actually do the sanding job?

You need to use your edging sander in order to sand all the edges, while with the help of drum sander you must sand rest of the flooring. You can always rely on the expertise of the experts working for flooring Newcastle service in your locality. You must always try to sand with the grain of the wooden surface.

4. What type of sandpaper is needed?

Use 24 grit, 40 grit, 80 grit and 120 grit sand paper. Initially start with coarse sandpapers and after that, you must dust off the surface and make it smooth with less coarse sandpapers. 

5. How much sandpaper will be consumed for completing the job?

It all depends upon the size of your floor. You need to switch the sandpaper very frequently, and therefore you must buy extra amount of sandpaper. If any sandpaper remains unused, then you can return it back to the store.

6. Can I use hand sander for floorboards?

It is not recommended and it will be costly for you too. 

When Should You Repair Or Replace Your Wood Flooring

Replacement of wooden flooring with the help of any flooring Morpeth service may cost you money, and therefore before taking decision about their replacement, you must inspect its condition very carefully and take your decision.

For simple scratches or scuffs

Usually wooden floor does not get damaged so easily, unless and until it is abused or there is any kind of accident.  Most of the times, it may get a minor scratch or a scuff due to your furniture movement.

In all such cases, you can either refinish it by sanding operation or you can re polish the damaged area. Usually this type of scratching can be prevented by using a special coating on the surface of wooden flooring. The experts from flooring Sunderland services will also suggest the same. If the damage is very serious in nature, then you can consider replacing only the damaged portion of the plank.

For severe damages

Many often, certain portion of the wooden plank may get seriously damaged due to different reasons. In such cases, it may not be possible to repair the damage by sanding or recoating. In such cases, it is better to replace the only damaged portion of the wooden plank.

Flooring Newcastle


While doing so, it is necessary to match it with old flooring. Therefore, you must go to same manufacturer who supplied you the material during installation. You must use certified technicians for doing such jobs, or else it may give very bad look to your flooring.

If damaged due to water
Many often, your flooring may get damaged due to excessive water flow on its surface. In such cases, the supports under the wood may also get damaged. Therefore, you need to replace not only the wooden strips, but the support also. This type of job is too complex and you must employ a very well experienced technician, so that he can do proper justice to your flooring. In some cases you may need to replace the whole flooring and upgrade it with water resistant flooring.

How to take decision for partial or complete replacement?

In order to take such decision, you must contact any professional who can inspect it properly and suggest you accordingly.  You must also learn from him how to maintain such floors so that you can prevent such damage in future.